Tested: ResinLapse 3D Printing on Elegoo Saturn!

We test the Elegoo Saturn resin mSLA 3D printer, and capture our test prints using a new time-lapse accessory developed by Uncle Jessy and Andrew Sink! ResinLapse is a clever way to synchronize a Canon DSLR’s shutter to the exact moment each layer of your print is cured, producing mesmerizing time-lapse video that looks like a print is emerging smoothly out of resin vat. Norm shows how this works with the Elegoo Saturn and some considerations when 3D printing this way.

ResinLapse cable: https://www.etsy.com/listing/970847090/resinlapse-resin-3d-printer-timelapses
Elegoo Saturn: https://amzn.to/3slauw1

Shot and edited by Norman Chan

Comments (2)

2 thoughts on “Tested: ResinLapse 3D Printing on Elegoo Saturn!

  1. Wow, those time lapses are really sharp. Absolutely night and day with the traditional method.

    Great job on the very clear explanation of the problem, solution, and differences between them. Anything can be interesting if you set it up properly and explain it well.

    Also: the Mystery Object music!

  2. Do you know about the best dating site in the world? Then you are here russian-mailorderbride .We have the best girls in Russia who are capable of everything,the hottest things.Here you will find the most beautiful, smart, most gentle, and also very good housewives. My friend went to this site and within a week found his soulmate there, I wish everyone to find their love there, I found mine, the wedding is coming soon .Have a good search and find your love and be loved.

Leave a Reply

Your email address will not be published.

Adam’s One Day Builds: Mythbusters Blueprint Display with Ky…

One Day Builds

Adam’s One Day Builds: Mythbusters Blueprint Displ…

Adam welcomes @KyleHillScience to the cave for the very spec…

Podcast - This Is Only a Test

Resin Printing Questions – This is Only a Test 633…

Special guest Clayton aka Uncle Jessy joins us this week for a full episode discussing the latest in resin 3D printing! We hear how he got started with rapid prototyping and his thoughts on new innovations being introduced to resin printers this past year. An hour of geeking out with one of our favorite YouTubers!

Adam Visits Ghostbusters: Afterlife’s Costume Department!

Culture

Adam Visits Ghostbusters: Afterlife’s Costume Depa…

Adam steps into the costumes trailer on the set of Ghostbust…

Adam’s Favorite Screwdriver Design!

Making

Adam’s Favorite Screwdriver Design!

After years of having drawers full of all sorts of screwdriv…

Adam Checks Out the Apollo 11 Command Module!

Show And Tell

Adam Checks Out the Apollo 11 Command Module!

We all know Adam is obsessed with Apollo 11, and while visit…

Ask Adam: Myths Adam Wishes Were Taken Further

Making

Ask Adam: Myths Adam Wishes Were Taken Further

In this live-stream excerpt, Adam answers MythBusters-relate…

Adam’s One Day Builds: Gauge Block Storage Rack!

One Day Builds

Adam’s One Day Builds: Gauge Block Storage Rack!

Adam's in a metrology state of mind this week as he sets out…

Ask Adam: How to Deal With Creative Block

Making

Ask Adam: How to Deal With Creative Block

In this live stream excerpt, Adam answers questions from Tes…

Adorable Mini C-Stand + D-I-Y LED Ring Light!

Making

Adorable Mini C-Stand + D-I-Y LED Ring Light!

We check out this fully-functional and adorable tabletop C-S…

Podcast - This Is Only a Test

The Wait for PSVR 2 Begins – This is Only a Test 6…

The new year commences with CES in full swing as we recap how we spent our holidays, the movies we watched, and the gifts we gave and received. The gang discusses the big tech announcements out of CES, including details on Sony's PSVR 2, HTC's wrist trackers, and passthrough applications on Quest 2. Plus, a new Stern pinball machine and n…