Tested in 2021: Bill’s Favorite Things!

Bill Doran checks in from the workshop of Punished Props Academy to share some of his favorite tools and builds from this past year! From his incredible Highlander-inspired lightsaber build to fantastic Ghostbusters props, here’s how Bill put those together with new shop tools like a knurling wheel for his lathe and 3D print card scrapers. Plus, some of Bill’s beautiful hobby photography with his new camera gear!

Mini Lathe, Straight Knurling Tool, Diamond Knurling Tool, Card Scrapers, Cordless Hair Dryer, Cordless Heat Gun, Cordless Hot Glue Gun, Lego Bansai Tree, Sony A7RIII Camera Body, Sony 50mm Lens, Sony 200-600mm Lens, Sony 90mm Macro Lens, Sigma 24-70mm Lens. Disclaimer: Tested may earn an affiliate commission when you buy through the links here.

Watch: Bill’s Ecto Goggles build, Highlander Lightsaber build, Bill’s Ghostbusters builds Playlist.

Comments (6)

6 thoughts on “Tested in 2021: Bill’s Favorite Things!

      1. Seriously I don’t know why more people haven’t tried this, I work two shifts, 2 hours in the day and 2 in the evening…FGh And i get surly a check of $12600 what’s awesome is I m working from home so I get more time with my kids.

        Try it, you won’t regret it……..CASHAPP NOW

  1. She’s been laid off for two months, the previous month her paycheck was $20328 ONLY working at home for a couple of hours each day…

    check out… WorkJoin1

  2. My last pay check was $8750 just ecom working 12 hours for every week. My neighbor have found the estimation of $15k for a long time and she works around 20 hours for seven days. I can not trust how direct it was once I tried it information..

    Visit this website…… Visit Here

  3. I make 85 dollars each hour for working an online job at home. KLA I never thought I could do it but my best friend makes 10000 bucks every month working this job and she recommended me to learn more about it. The potential with this is endless.

    For more detail …. Visit

Leave a Reply

Your email address will not be published.

New Form 3+ SLA 3D Printer Review + Build Platform 2!

Tech

New Form 3+ SLA 3D Printer Review + Build Platform…

We test and review the new Formlabs Form 3+ along with its B…

Adam’s One Day Builds: Mythbusters Blueprint Display with Ky…

One Day Builds

Adam’s One Day Builds: Mythbusters Blueprint Displ…

Adam welcomes @KyleHillScience to the cave for the very spec…

Podcast - This Is Only a Test

Resin Printing Questions – This is Only a Test 633…

Special guest Clayton aka Uncle Jessy joins us this week for a full episode discussing the latest in resin 3D printing! We hear how he got started with rapid prototyping and his thoughts on new innovations being introduced to resin printers this past year. An hour of geeking out with one of our favorite YouTubers!

Adam Visits Ghostbusters: Afterlife’s Costume Department!

Culture

Adam Visits Ghostbusters: Afterlife’s Costume Depa…

Adam steps into the costumes trailer on the set of Ghostbust…

Adam’s Favorite Screwdriver Design!

Making

Adam’s Favorite Screwdriver Design!

After years of having drawers full of all sorts of screwdriv…

Adam Checks Out the Apollo 11 Command Module!

Show And Tell

Adam Checks Out the Apollo 11 Command Module!

We all know Adam is obsessed with Apollo 11, and while visit…

Ask Adam: Myths Adam Wishes Were Taken Further

Making

Ask Adam: Myths Adam Wishes Were Taken Further

In this live-stream excerpt, Adam answers MythBusters-relate…

Adam’s One Day Builds: Gauge Block Storage Rack!

One Day Builds

Adam’s One Day Builds: Gauge Block Storage Rack!

Adam's in a metrology state of mind this week as he sets out…

Ask Adam: How to Deal With Creative Block

Making

Ask Adam: How to Deal With Creative Block

In this live stream excerpt, Adam answers questions from Tes…

Adorable Mini C-Stand + D-I-Y LED Ring Light!

Making

Adorable Mini C-Stand + D-I-Y LED Ring Light!

We check out this fully-functional and adorable tabletop C-S…