Paint Masking Using a Laser Cutter!
Tested contributor Bill Doran (aka Punished Props) is in our shop this week and experiments using our Universal Laser Systems laser cutter to make a quick paint mask for a helmet. This can be done with standard painter’s tape or a large sheet of masking tape, and we learn some lessons about masking complex curves.
3 thoughts on “Paint Masking Using a Laser Cutter!”
Leave a Reply

Tech
Tested: SLR Magic Cine Lenses for Micro Four Third…
Joey continues his journey testing cine lenses with this set…

One Day Builds
Adam’s One Day Builds: Razor Crest Mods, Part 1!
Adam and Norm begin the long-term project of modifying their…
Pop Culture Power Hour – This is Only a Test 650 –…
As we approach the debut of the Obi-Wan show, we discuss all the nuggets of Star Wars news revealed in the recent Vanity Fair feature. Kishore and Norm also react to the She-Hulk teaser, ponder Stan Lee's future in the MCU, and are wowed by two newly announced LEGO sets. Plus, some spoiler-light thoughts on the Picard season 2 finale and …

Show And Tell
Inside Adam’s Cave: Wooden Screwdriver Mailbag Unb…
Adam opens a viewer mailbag containing an ironwood interpret…

Making
Ask Adam Savage: Behind the MythBusters Cement Tru…
In this livestream excerpt, Adam answers MythBusters-related…

Show And Tell
Show and Tell: Adam Savage’s LEGO Minifigure Colle…
In this live stream excerpt, Adam shares his collection of c…

Culture
Ask Adam: Job Interview Advice, Jamie’s Flamethrow…
In this live-stream excerpt Adam answers questions from Test…

Making
Let’s Build: Japanese Steamed Bun Shop Kit!
This cozy miniature representation of a Japanese steamed bun…

Culture
Ask Adam: The Origin of M5, M6 and M7 (Plus, Their…
Adam answers questions from Tested members Aaron and Silver …
Ctrl-F For Real Life – This is Only a Test 649 – 5…
On the night after Google I/O, Kishore and Norm pod up to discuss the new Pixel devices announced and teased, and break down the augmented reality demos shown. We also share thoughts on the Moon Knight finale (spoilers within!) and compare notes on the technology of the Avatar 2 teaser. Plus, the end of the iPod era!
I think the message of this video is: buy a vnyl cutter if you want to mask properly. 🙂
😉 It might be yes. And ofcourse you need a few white coats first, drying it in between and your leakage is gone.
Adding a disclaimer that painting helmets can affect the integrity of the shell. We don’t use this helmet for safety wear, and most manufacturers discourage painting helmets that are in use: http://www.bellhelmets.eu/paint-shop/