Simone Giertz’s Coat Hanger for Coat Hangers

Simone walks us through an idea she’s had for a while to improve her new apartment: making a giant coat hanger to hang all of her other coat hangers. Building this coat hanger-coat hanger is also the perfect excuse for Simone to visit Shaper and test their Origin handheld CNC for this project.

Comments (18)

18 thoughts on “Simone Giertz’s Coat Hanger for Coat Hangers

  1. That works great for open storage like that but I wonder how it fits in a closet? The limited depth could be a problem…

    Also what happens when it gets off balance? Say you wear 3 things from one end… It would tilt and maybe even unhook from the closet rod.

    Inquiring minds must know?

  2. If the notch for each clothes hanger is deep enough (or if each notch is shaped as an inverted T), I think that each clothes hanger will not fall out. Minimizing the distance between the ceiling and pole for the big hanger will stop the big hanger from turning a full 90 degrees. The pole for the large hanger can be replaced with chains and a hook as well.

    For disassembling and moving, it is good that you do not need wood glue.

    Simone, nice addition for adapting to the space of your place.

  3. the cnc is interesting going to have to look into it more.

    Also glad Simone is doing more than just “crappy robots”

  4. She shown a bit of her place on her own channel, it is a badass looking space. Then again, her house in Sweden is a boat. So her standards are high :p

  5. Check the work bench, super strong and functional. Get the plans from Paulk.com. I have made two and cant praise them enough.

Leave a Reply

Your email address will not be published.

New Form 3+ SLA 3D Printer Review + Build Platform 2!

Tech

New Form 3+ SLA 3D Printer Review + Build Platform…

We test and review the new Formlabs Form 3+ along with its B…

Adam’s One Day Builds: Mythbusters Blueprint Display with Ky…

One Day Builds

Adam’s One Day Builds: Mythbusters Blueprint Displ…

Adam welcomes @KyleHillScience to the cave for the very spec…

Podcast - This Is Only a Test

Resin Printing Questions – This is Only a Test 633…

Special guest Clayton aka Uncle Jessy joins us this week for a full episode discussing the latest in resin 3D printing! We hear how he got started with rapid prototyping and his thoughts on new innovations being introduced to resin printers this past year. An hour of geeking out with one of our favorite YouTubers!

Adam Visits Ghostbusters: Afterlife’s Costume Department!

Culture

Adam Visits Ghostbusters: Afterlife’s Costume Depa…

Adam steps into the costumes trailer on the set of Ghostbust…

Adam’s Favorite Screwdriver Design!

Making

Adam’s Favorite Screwdriver Design!

After years of having drawers full of all sorts of screwdriv…

Adam Checks Out the Apollo 11 Command Module!

Show And Tell

Adam Checks Out the Apollo 11 Command Module!

We all know Adam is obsessed with Apollo 11, and while visit…

Ask Adam: Myths Adam Wishes Were Taken Further

Making

Ask Adam: Myths Adam Wishes Were Taken Further

In this live-stream excerpt, Adam answers MythBusters-relate…

Adam’s One Day Builds: Gauge Block Storage Rack!

One Day Builds

Adam’s One Day Builds: Gauge Block Storage Rack!

Adam's in a metrology state of mind this week as he sets out…

Ask Adam: How to Deal With Creative Block

Making

Ask Adam: How to Deal With Creative Block

In this live stream excerpt, Adam answers questions from Tes…

Adorable Mini C-Stand + D-I-Y LED Ring Light!

Making

Adorable Mini C-Stand + D-I-Y LED Ring Light!

We check out this fully-functional and adorable tabletop C-S…