Zoidberg Jesus at Comic-Con!

We love going to Comic-Con, but have noticed that every year there are some picketers outside that take a little bit of the fun away from going to these fan events. We decided to bring the fun back by introducing them to our friend, Zoidberg Jesus.

Video shot and edited by Joey Fameli

Comments (24)

24 thoughts on “Zoidberg Jesus at Comic-Con!

  1. It seems that those religious picketers were pretty chill, compared to some I have encountered. Someone who went to comic-con would know better and I cam curious at how calm, or not, they were.

  2. they were pretty chill, and didn’t get into anyone’s faces. even though we may not agree with what they were doing, we’re glad it was all kept light-hearted. even caught a few smiles!

  3. Ah, that looked fun! I was at a work conference there a week before SDCC, only saw a couple of street picketers that I think were “warming up” for the big event.

  4. This is the beauty of this country. They have the freedom to proselytize outside of a large convention like Comic-Con. As well as the fact that you have the freedom to poke a little fun at those same individuals.

    Try doing that with a Mohammed Zoidberg in a Middle Eastern country, and see how well that goes over…

  5. Pretty sure that guy in the yellow shirt is the same guy who posted a lengthy reply on a Tested-related reddit post (I think the cosplay gallery from this year, where the picketers were shown), about how they never antagonize anyone. Then five minutes later, someone replied with a video where the very same guy was shouting homophobic abuse at people walking in a Pride-march. Full-on nutter.

    Frank wasn’t the only one poking them a bit either, when I walked by there was a dozen or so people with improvised posters doing a counter-picket next to them. laughing their asses off.

  6. At least you didn’t get the real hardcore types. I’ve been around them before and I doubt they would have taken the joke as well as these apparently did.

  7. I always lol at religious nutters with megaphones, do they really think they change peoples minds about that stuff, I hope not.

  8. This is awesome. I was always annoyed that religious people did this this at comic-con. This is getting a lot of hate on Youtube but that seems to be the case with every video of tested’s. I think I won’t even look at the comments on youtube tested videos anymore, I will just come here.

  9. Good costume, fun idea and a bit of levity all around. The youtube comments for this video are insufferable though, belief in the almighty space lord doesn’t make you immune from some light hearted criticism.

  10. The Lego-build teaser was a lot more controversial than this amongst the youtubers. I think a lot of religious people find picketing preachers just as insufferable as the rest of us do.

  11. I don’t, but I think someone linked to it on the forums when it was posted, so you might be able to search for it? I’m pretty sure it was this year’s cosplay gallery.

Leave a Reply

Your email address will not be published.

Adam’s Penny Drop Wind Tunnel (with Veritasium!)

Culture

Adam’s Penny Drop Wind Tunnel (with Veritasium!)

Adam demonstrates the wind tunnel he built for the Penny Dro…

Adam’s Mystery Roman Centurion Helmet!

Show And Tell

Adam’s Mystery Roman Centurion Helmet!

Adam recently picked up this Roman guard helmet from eBay, p…

Adam’s One Day Builds: Nagra Recorder Handle Bar

One Day Builds

Adam’s One Day Builds: Nagra Recorder Handle Bar

Adam is absolutely enamored by the beauty of his new Nagra I…

Adam’s Favorite Tools: Backstage Handbook Illustrated Almana…

Show And Tell

Adam’s Favorite Tools: Backstage Handbook Illustra…

As makers, knowing the common name of tools and processes ca…

Show and Tell: Hector Salamanca’s Bell Replica!

Show And Tell

Show and Tell: Hector Salamanca’s Bell Replica!

Adam shares a delightful find for Breaking Bad and Better Ca…

How the adidas 4DFWD 3D Printed Running Shoe Is Made!

Making

How the adidas 4DFWD 3D Printed Running Shoe Is Ma…

We've long looked forward to the time when 3D printing becom…

Adam’s One Day Builds: Machinist Tools Cabinet!

One Day Builds

Adam’s One Day Builds: Machinist Tools Cabinet!

Adam revisits another one of his shop infrastructure builds …

Podcast - This Is Only a Test

EV Questions Answered – This is Only a Test 666 – …

Marvel shocks us with a surprise Deadpool 3 announcement, NASA completes a test of its planetary defense strategy, and Stadia gets sunsetted in this week's packed news discussion. We also welcome EV reporter Robbie Baldwin to the show to answer our questions about the current state of electric vehicles around the globe, and what people in…

Adam Savage in Real Time: Assembling and Lining Flat File Dr…

Premium

Adam Savage in Real Time: Assembling and Lining Fl…

Adam assembles the plywood pieces he cut to form his new fla…

Adam Savage in Real Time: Cutting Flat File Drawers

Premium

Adam Savage in Real Time: Cutting Flat File Drawer…

Unhappy with the storage of his various measuring tools (an …