Quantcast
Latest StoriesPrint the Mystery Object
    MakerBot Mystery Build: Something Isn't Quite Right Here

    It's Friday, so that means it's time for another MakerBot mystery build! Something went slightly awry in this week's print, but you'll have to watch and see to find out what exactly went wrong. Place your best guess as to what's being printed in the comments below!

    MakerBot Mystery Build: Keep it Toasty

    It's Friday, so time for anther episode of our MakerBot Mystery Build! This week, Will finds a tool to print that will help us around our office, especially in the mornings. Place your guess as to what's being printed in the comments below!

    Makerbot Mystery Build: Failure is an Option

    Time for another edition of the mystery build, starring our MakerBot Replicator 3D printer! Every week, we download a 3D model from Thingiverse and test it with the MakerBot, turning bits into atoms! Place your best guess as to what's being printed in the comments below.

    MakerBot Mystery Build: Mr. Rogers Would Approve

    It's Friday, and time for another mystery print from our MakerBot Replicator 3D printer! This week's print goes off without a hitch, and it's something practical too! Place your best guess as to what's being printed this week in the comments below.

    MakerBot Mystery Build: Big Floppy Ears

    Friday brings another edition of our mystery 3D print series with the MakerBot Replicator! Will gets ambitious and sends another day-long print to the machine, and this one ends up going for over 27 hours! Place your best guess as to what's being built in the comments below.

    MakerBot Mystery Build: Could Use Some Propping

    It's time for another edition of Print the Mystery Object with the MakerBot! This week, Will gives an early hint but you're still going to be hard-pressed to guess what's being made by the Replicator 3D printer! Place your best guess in the comments below.

    MakerBot Mystery Build: Running Cool

    Time for another MakerBot Mystery Build! This week, Will stays topical with a print that's far from tropical. Place your best guess as to what our MakerBot is printing in the comments below! Winner gets a tip of the hat and the famous no-prize.

    MakerBot Mystery Build: The 24-Hour Print

    It's Friday, so time for another mystery build from our newly upgrade MakerBot Replicator 3D printer! This week, Will attempts to print one of those most complicated models he's sliced and sent to the MakerBot so far, and it ends up going overnight (watch that sunrise!). As always, place your guess as to what's being printed in the comments.

    MakerBot Mystery Build: For Dug

    It's Friday, so that means it's time for another MakerBot Mystery Build. This week's print is relatively simple, easing the MakerBot back to work after its upgrade last week. As always place your guess as to what's being printed in the comments below!

    MakerBot Mystery Build: Upgrading the Replicator!

    Will makes an upgrade our MakerBot Replicator 3D printer to improve the stability of the build platform with aluminum arms. It requires disassembling the MakerBot, which we haven't done before. There's potential for disaster, but could improve the quality of all our future prints. Watch Will get to work in reality-distorting time-lapse!

    MakerBot Mystery Build: Back for Realsies

    The MakerBot makes a return (again) after another extended break! This time, Will has clean out the gears in the Replicator which have been clogged with plastic gunk from a year's worth of printing. That maintenance helps it print something that Will attempted last year but wasn't able to get right.

    MakerBot Mystery Build: Back from Sabbatical

    The MakerBot returns from a brief hiatus! After some much-needed maintenance, the Replicator is put back to work turning digital designs into real objects. This week's object is actually very useful--place your best guess of what's being printed in the comments below.

    MakerBot Mystery Build: Lessons in Failure

    This week's MakerBot build doesn't go exactly as planned, but there's a valuable lesson to be learned when things don't go right. It all works out in the end, so still place your best guess as to what's being printed in the comments below!

    MakerBot Mystery Build: Smart Cookie

    It's Friday, which means it's time for another MakerBot Mystery Build! This week's print demonstrates one of the unique qualities of objects you can make with the Replicator. Place your best guess as to what's being 3D printed in the comments below.

    MakerBot Mystery Build: Swear To Me

    Friday brings another edition of the MakerBot Mystery Build! This week, Will has the MakerBot build something that most of you should recognize. The print is bottom heavy but the finished item is surprisingly structurally sound. Place your best guess as to what's being printed in the comments!

    MakerBot Mystery Build: 19,000 Solutions

    It's Friday, which means it's time for another MakerBot Mystery Build! This week, Will uses the MakerBot to create something that racks his mind. It's not something as simple as Tetris, but place your best guess as to what's being printed in the comments below!

    MakerBot Mystery Build: Home Office Basketball

    It's Friday, so time for another the MakerBot to print a mystery object! Place your best guess as to what it's printing, through that's going to especially tough this week. It's a MakerBot episode like none we've ever done!

    MakerBot Mystery Build: Uno Dos Tres

    It's time for another edition of the MakerBot Mystery Build! This week, Will prints an accessory for a project he's been working on lately, which makes that device a bit cooler. Place your best guess of what the MakerBot is printing in the comments below!